Model | CP1208-16A-4K | |
Input | Voltage Range | 85 ~ 264 VAC |
Frequency Range | 47 ~ 63 Hz | |
Efficiency | ≥85%@Rated voltage | |
AC Current | 6.5A | |
Inrush Current | Cold start:≤40A@115Vac;≤70A@230Vac | |
Leakage Current | IP~OP Leakage current:≤0.25mA,Touch current<0.1mA@264Vac | |
Output | Rated Voltage | DC 12V |
Rated Current | 16A | |
Voltage Adjustment Range | DC 12V ~ 15V | |
Current Range | 0~16A | |
Rated Power | 192W | |
Total Output Channel | 8CH | |
Fuse type | 2A PTC/CH | |
Ripple & Noise | ≤100mVpk | |
Voltage Tolerance | ±3% | |
Line Regulation | ≤0.1% | |
Load Regulation | ≤0.1% | |
Setup,Rise,Hold Up Time | 230Vac Full load:≤3S,≤3S,≥10mS | |
Protection | Over load | 110% ~ 150%@Rated power.PTC protection mode,recovers automatically after fault condition is removed. |
Over Voltage | 110% ~ 130%@Rated voltage.Hiccup mode, recovers automatically after fault condition is removed. | |
Over Current | 110% ~ 150%@Rated curren.PTC protection mode,recovers automatically after fault condition is removed. | |
Short Circuit | No damage,PTC protection mode,recovers automatically after fault condition is removed. | |
Environment | Working Temp.,Humidity | Temp.:-10℃ ~ +40℃ ;Humidity:10% ~ 95% RH, Non-condensing |
Storage Temp.,Humidity | Temp.:-20℃ ~ +85℃ ;Humidity:10% ~ 95% RH, Non-condensing | |
Temp.Coefficient | ≤0.03V/℃(0℃ ~ +45℃) | |
Vibration | 10 ~ 500Hz,2G 10min./1cycle, 60min. each along X,Y,Z axes | |
Safety & EMC | Safety Standards | CE:IEC 62368-1;IEC 60950-1 |
Withstand Voltage | IP~OP: ≥3KVac | |
Isolation Resistance | IP~OP: ≥100MΩ@500Vdc,25℃,70% RH | |
EMC | FCC/Part 15 ;EN55032、EN55035;EN/IEC61000 | |
Others | Product Size | 201*260*86.8mm |
Packing | 4pcs/carton 52.5*32*26CM | |
Certificate | CE | |
Warranty | 2 Years |